Question details

Cisco Networking - WAN Implementation with SOHO Configuration
$ 10.00

co Networking—WAN Implementation with SOHO Configuration (Parts 1-3)




 

Overview

-

Along with the challenges presented in this document, you will be provided an overall site topology to work from, as well as specific device configurations (where applicable) to make your recommendations.

Suggested solutions should be comprehensive and justified in approach. Configurations of technologies should be written out to help guide the systems administrators with implementation. In some cases, you may find it necessary to implement additional cabling, which can be done by adding to the supplied topology. Any adjustments to the sites’ topology that you find necessary should be documented and supplied with your submission.

Your document will be divided up by site and solutions per site. Each area is unique in requirements but collectively will demonstrate your understanding of network routing and switching technologies. Each scenario will provide you with suggested sections within TestOut (LabSim) to use as a guide in your analysis and recommendations.

You can use this template as a guide on how to format your project. Be sure to cite your external sources using the IEEE citation style. To learn how you will be assessed on this assignment, please take a moment to review the rubric.


 

Existing VLANs 

-

Remote locations vary in terms of size and requirements. Some implementations will require current site router/switch-running configurations, which will be provided. All sites will use the following four VLANs, but you will need to configure only what is asked per site (some assumptions will be made).

Available solutions