Question details

Sacramento Site VLAN, Routing on a Stick (ROS) and DHCP Implementation -Required Implementation
$ 20.00

Sacramento Site VLAN, Routing on a Stick (ROS) and DHCP Implementation 

-Required Implementation: VLANs, ROS, and DHCP implementation

VLANs: Implement the VLAN database on the Sacramento site switches. Explain the assignment of switchport modes and how to implement each. Demonstrate how to implement port security on the switchports to allow only two MAC addresses per port and shutdowns for violations. Additionally, consider proper security management of any unused ports.

Provide the VLAN IDs, ports with matching switchport modes, and sample configuration of port security and port management steps.

ROS: The site will be treated as a routing on a stick (ROS) topology. Provide a sample configuration for Sacramento fa0/0 interface to support the multiple VLAN’s and inter-vlan routing.

To simplify configuration, please use the following addressing:

faculty VLAN: 10.50.0.0 /26

administrative VLAN: 10.50.0.64 /26

instructional VLAN: 10.50.0.128 /26

server VLAN: 10.50.0.192 /26

DHCP: The site will need a solution to manage the deployment of IP addresses. Briefly explain the purpose of DHCP and provide implementation of the DHCP configuration for the VLANs. Be sure to include the pool name, exclude the last 10 addresses of each subnet range and configure the gateway, subnet mask and DNS Address (Sacramento fa0/0 address).

Please refer to the following configurations:

SacramentoSw1

SacramentoSw2

SacramentoSw3

SacramentoRouter

Los Angeles Site Management Technologies -

Required Implementation: Device configuration remote storage, remote management of switches, ACL implementation, and an NTP solution.

Remote IOS Storage: The site will require remote storage of the devices configurations. Server details are provided per your topology. You will determine the protocol to use and demonstrate how to implement the solution.

Remote Management of Switches: All devices will be configured to allow for remote management. You will be required to implement this solution on the switches found on the site.

ACL Implementation: In order to restrict and protect access to the devices, the only VLAN allowed to communicate remotely with the devices should belong to the server VLAN. Determine the type of ACL to implement and the placement of the list, and implement the solution on the site router.

Network Time Protocol: Implement an NTP solution on the devices found within this topology to ensure clock synchronization is accomplished. The purpose would be for accurate logging records and authentication protocols. Server details are provided per your topology.

Please refer to the following configurations:

LosAngelesSw1

LosAngelesSw2

LosAngelesSw3

LosAngelesRouter

Available solutions